Ознакомительное Руководство для Olympus DS-2500

This recorder uses memory in the form of SD card 
memory.  

  The recorder supports cards with memory
capacity between 512 MB to 32 GB.

Check the latest operating information on the 
Olympus homepage (http://www.olympus.
com) when using cards other than the included 
card. In addition, refer to the following pages 
as well when handling the card.

•  Inserting and ejecting a SD card (

☞ P.19).

•  Formatting the card [Format] (

☞ P.50).

1 Card lock

  SD card is equipped with a lock function.
When the lock function is used, important 
data is protected by preventing it from being 
accidentally overwritten or erased.
When the lock function is set [ ] will appear on 
the display.

2 Index area

For writing down information identifying card
or content.  

3 Contact area

  Comes into contact with the recorder’s signal 
read  contacts.   

Information such as the memory capacity and 
remaining memory for installed cards can be 
displayed on the recorder ( 

☞  P.40). 

 • 

  •  In some cases cards which have been formatted 

(initialized) by another device, such as a computer, 
cannot be recognized. Be sure to format them 
with this recorder before using.

  •  The card has a service life. When reaching the end 

of its life, writing or erasing data on the card will 
be disabled. In this case, replace the card.

  •  If you use a PC card adapter compatible with the 

card to save or delete some data on the card, the 
maximum recording time on the card may be 
decreased. To recover the original recording time, 
initialize/format the card in the recorder. 

 •  Olympus will not be held liable for any data 

corruption or loss due to misuse of the media 
card. 

1

3

2

BACK

EXIT

Card Info.

     SD

Remain
Capacity

540MB

   2.0GB