Инструкция С Настройками для Olympus TG-810

52 EN

For information on using the menus, see “Setup menu” (p. 6).

Adjusting the CCD and the image

Adjusting the CCD and the image
processing function [Pixel Mapping]

processing function [Pixel Mapping]

s (Settings 2) X Pixel Mapping

This function has already been adjusted at factory

shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.

For best results, wait at least one minute after taking

or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.

To adjust the CCD and the image

To adjust the CCD and the image
processing function

processing function

Press the

A button when [Start] (Submenu 2) is

displayed.

The camera checks and adjusts the CCD and the
image processing function at the same time.

●

Adjusting the brightness of the monitor

Adjusting the brightness of the monitor
[[s

s]]

s (Settings 2) X s

To adjust the monitor brightness

1 Use

FG to adjust the brightness while viewing the

screen, and then press the

A button.

MENU

Set

Back

Playing back images on a TV [TV Out]

s (Settings 2) X TV Out

The TV video signal system varies depending on the countries and regions. Before viewing camera images on your

TV, select the video output according to your TV’s video signal type.

Submenu 2

Submenu 3

Application

Video Out

NTSC

Connecting the camera to a TV in North America, Taiwan, Korea, Japan,
and so on.

PAL

Connecting the camera to a TV in European countries, China, and so on.

HDMI Out

480p/576p
720p
1080i

Set the playback format.

HDMI Control

Off

Operate with the camera.

Operate with the TV remote control.

The factory default settings differ according to the region where the camera is sold.