Справочник Пользователя для Netgear WC7600v2 – ProSAFE Wireless Controller
Maintain the Wireless Controller and Access Points
263
ProSAFE Wireless Controller
5.
Enable SNMP and configure the settings as described in the following table.
6.
Click the Apply button.
Your settings are saved.
Specify Session Time-Outs
If an HTTP session times out, the user is redirected to the login page for password
verification.
verification.
Setting
Description
SNMP
Select the SNMP check box to enable SNMP for the wireless controller.
Read-Only Community Name
Enter the community string that allows the SNMP manager to read the
wireless controller’s MIB objects.
wireless controller’s MIB objects.
The default setting is public.
Read-Write Community Name
Enter the community string that allows the SNMP manager to read and
write the wireless controller’s MIB objects.
write the wireless controller’s MIB objects.
The default setting is private.
Trap Community Name
Enter the community name that is associated with the IP address to
receive traps.
receive traps.
The default setting is trap.
IP Address to Receive Traps
Enter the IP address at which the SNMP manager receives traps sent from
the wireless controller.
the wireless controller.
Trap Port
Enter the port on which the SNMP manager receives traps sent from the
wireless controller.
wireless controller.
The default setting is port 162.
SNMP Manager IP
Enter the IP address of the SNMP manager.
To allow any SNMP manager to access the wireless controller, keep this
field blank.
field blank.