Справочник Пользователя для Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch
Chapter 7. Monitoring the System
|
567
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
The following table describes the Trap Log information displayed on the screen.
The page also displays information about the traps that were sent.
Click Clear Counters to clear all the counters. This resets all statistics for the trap logs to the
default values.
default values.
Table
7-116.
Field
Description
Number of Traps Since Last
Reset
Reset
The number of traps that have occurred since the switch last reboot.
Trap Log Capacity
The maximum number of traps stored in the log. If the number of traps
exceeds the capacity, the entries will overwrite the oldest entries.
exceeds the capacity, the entries will overwrite the oldest entries.
Number of Traps since log
last viewed
last viewed
The number of traps that have occurred since the traps were last displayed.
Displaying the traps by any method (terminal interface display, Web display,
upload file from switch etc.) will cause this counter to be cleared to 0.
Displaying the traps by any method (terminal interface display, Web display,
upload file from switch etc.) will cause this counter to be cleared to 0.
Log
The sequence number of this trap.
System Up Time
The time at which this trap occurred, expressed in days, hours, minutes and
seconds since the last reboot of the switch.
seconds since the last reboot of the switch.
Trap
Information identifying the trap.