Руководство По Установке для Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports
This symbol was placed in accordance with the European Union
Directive 2002/96 on the Waste Electrical and Electronic Equipment (the
WEEE Directive). If disposed of within the European Union, this
product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
Directive 2002/96 on the Waste Electrical and Electronic Equipment (the
WEEE Directive). If disposed of within the European Union, this
product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
© 2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR,
Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their
respective holders. Information is subject to change without notice.
July 2010
The Smart Control Center utility finds the switch and displays its MAC
Address, IP Address, and model number. If you cannot configure your switch,
verify that the cable connections are secure, that the IP address configuration
of the PC is in the same subnet as the switch, and click the Discover button.
Address, IP Address, and model number. If you cannot configure your switch,
verify that the cable connections are secure, that the IP address configuration
of the PC is in the same subnet as the switch, and click the Discover button.
3. Click to select the line displaying the details of your switch. If there are
multiple switches in your network, be sure to select the one you want to
configure.
configure.
4. Click Web Browser Access to view the switch log in screen.
5. Enter the default password of password in lower case letters and click Login.
The switch will display the switch settings main page. Configure the switch
for your network. Consult the Reference Manual on the Resource CD or the
online help in the switch for assistance with configuration procedures.
After you log in to the switch, the main Web Access menu displays.
for your network. Consult the Reference Manual on the Resource CD or the
online help in the switch for assistance with configuration procedures.
After you log in to the switch, the main Web Access menu displays.
Use the configuration menu options to configure your switch.
Troubleshooting Tips
Here are some tips for correcting simple problems you may have.
Turn on the computer and switch in the correct sequence.
Follow this sequence. Turn off the switch and computer. First, turn on the
switch and wait two minutes. Next, turn on the computer.
switch and wait two minutes. Next, turn on the computer.
Make sure the Ethernet cables are securely plugged in.
For each powered on computer connected to the switch with a securely
plugged in Ethernet cable, the corresponding Smart Switch port status light
will be lit.
plugged in Ethernet cable, the corresponding Smart Switch port status light
will be lit.
Make sure the network settings of the computer are correct.
In most cases, computers should be configured to obtain an IP address
automatically via DHCP. For help with this, refer to the FS728TP Software
Administration Manual; a link to the online Reference Manual is on the
Resource CD.
If your network uses static IP addresses, be sure the switch and computer are
configured with valid IP addresses.
automatically via DHCP. For help with this, refer to the FS728TP Software
Administration Manual; a link to the online Reference Manual is on the
Resource CD.
If your network uses static IP addresses, be sure the switch and computer are
configured with valid IP addresses.
Technical Support
Thank you for selecting NETGEAR products.
After completing the NETGEAR FS728TP Smart Switch setup, locate the serial
number on the bottom label of your product, and use it to register your product at
http://www.NETGEAR.com/register. Registration is required before you can use
our telephone support service. Registration via our website is strongly
recommended.
number on the bottom label of your product, and use it to register your product at
http://www.NETGEAR.com/register. Registration is required before you can use
our telephone support service. Registration via our website is strongly
recommended.
For complete DoC please visit the NETGEAR EU Declarations of Conformity
website at:
website at:
Go to http://kbserver.netgear.com for product updates and Web support. For
Warranty and Regional Customer Support information, see the Resource CD that
came with your product.
Warranty and Regional Customer Support information, see the Resource CD that
came with your product.
FS728TPv2_IG_22July10.fm Page 2 Friday, July 23, 2010 3:09 PM