Справочник Пользователя для Netgear AirCard 779S (AT&T) – AT&T Unite Express

The default admin login password is attadmin, and the hotspot web page URL is 
http://attwifimanager or http://192.168.1.1.

If you changed the admin login password and can’t remember the password that you created, 
you must set the hotspot back to factory defaults. 



Press the Power button for fifteen seconds.

A factory reset takes about one minute. After the device resets, reconnect Wi-Fi devices.

Review these general questions about the hotspot.

If reception for your hotspot is poor, try moving the hotspot to a location with a clear view of 
the sky (for example, near a window).

Data transfer speed depends on signal strength and interfering radio sources like electrical 
generators or other hotspot Wi-Fi devices. Review the following possibilities:

Check your signal strength and network type (for example, LTE 4G is generally faster 
than 3G).

Check Wi-Fi interference by powering the hotspot off and on to find a better Wi-Fi 
channel.

Switch Wi-Fi channel from 2.4 GHz to 5 GHz.

If the network signal is low, consider using external antennas or cradle the hotspot with 
built-in high-gain antennas.

Press and hold the Power button for five seconds.

The LCD dims to save energy. The LED continues to flash slowly to indicate that the mobile 
hotspot is still powered on. To wake up the LCD, press and quickly release the Power button.