Справочник Пользователя для Netgear XAVNB2001 – Powerline AV 200 Wireless-N Extender Kit

Use the Security Button to Set the Encryption Key

An adapter can generate a private key only once. If you want to 

replace a private key, first reset the adapters to their factory settings. 

To do this either press the Reset button for 1 second, then release, 

You can use the Security button to change the default encryption key and set a private 

encryption key instead. The default encryption key is HomePlugAV.



Verify that all the Powerline adapters to be configured are plugged in. 

Do not press the Security button on the Powerline adapter until installation 

is complete and all adapters on your network are plugged in and 

communicating with each other. Pressing the Security button too soon can 

temporarily disable Powerline communication. If this should occur, reset 

the Powerline adapter to its factory default settings (press the Reset 

button for 1 second, then release).

Press the Powerline Extender  Security button for 2 seconds. 

The Power LED starts blinking after you release the button.

The adapter automatically creates a new, randomly generated network encryption key 

that each Powerline adapter on the network will use. 

At this point, the other adapters in your network cannot communicate with each other.

Within 2 minutes of pressing the Security button on the Powerline Extender, press the 

Security button on the second adapter for 2 seconds.
In order to pair the devices, you need to press both buttons within 2 minutes.
This securely configures your Powerline network with the same network encryption key.

If your network has more than two adapters, press the  Security button on the next adapter 

for 2 seconds, and then push the  Security button on any additional adapters in your 

network for 2 seconds. The adapters retain security settings even if they are unplugged.