Справочник Пользователя для Netgear XAVNB2001 – Powerline AV 200 Wireless-N Extender Kit

The top section of the Security screen shows information about each device that the 

Powerline Utility detects.

. This lists the Powerline devices detected on the network after the 

utility completes a scan for devices. The device name is initially set by the utility, but 

you can change it to a descriptive name such as Office or Master Bedroom. 

. This identifies the model number of the Powerline adapter. 

. The MAC address for the Powerline device. This is also on the 

product label, which might not be visible when the device is plugged in.

. To change settings for a remote Powerline device, you have to 

enter its password. The device password is located on the product label. 

Select the check box for each device for which you want to set the encryption key.

In Step 2 on your screen, select the option that you want:

. To set your own network encryption key, type your 

network encryption key in the field.

. When you select this option, the factory default 

encryption key automatically displays in the field. The default network encryption key 

is HomePlugAV.

Click the Apply Security to Selected Devices button.
When you are finished setting the encryption key, the utility displays a message indicating 

that the operation was successful.

Click OK.

Reset a Device to Factory Settings

This option returns the network encryption key to its factory default of HomePlugAV.

If you customized your network encryption key, the local Powerline 

device is disconnected from the network when you reset it to the 

factory defaults. To avoid this problem, reset all remote devices 

before you reset the local device.