Справочник Пользователя для Netgear WNA1000M - Wireless-N 150 USB Adapter

4.   

Troubleshooting

This chapter provides information about troubleshooting your wireless-N USB adapter. You can 
also refer to the Knowledge Base on the NETGEAR website at 

.

Frequently Asked Questions (FAQs)

The wireless-N USB adapter is not inserted securely in the USB port (or USB cable if used) 
or the WNA1000M software is not installed. 

Remove and reinsert the wireless-N USB adapter.

Check the Windows device manager to see if the wireless-N USB adapter is recognized 

and enabled. Re-install the WNA1000M software, if necessary.

Insert the wireless-N USB adapter in a different USB port on your computer if one is 

available.

Make sure that your wireless-N USB adapter is inserted securely into the USB port on 

your computer or the USB cable if you are using it. The wireless-N USB adapter LED 
should light up or blink (see 

14 for details).

Click the 

 icon to open the Smart Wizard and then click the Networks tab to view the 

networks in your area. Make sure the signal strength is strong and that you have selected 
the correct wireless network.

If the network uses wireless security, you need to either know the wireless security 

settings or use Push 'N' Connect if the network supports WPS. Some networks also 
restrict use to only computers or wireless devices with known MAC addresses. If that is 
the case, use the Smart Wizard About tab to find the MAC address for your wireless-N 
USB adapter and provide it to the network administrator.