Листовка для Xerox Xerox App Studio Support & Software
4. From the MFP’s CentreWare home page, navigate using this path: Properties >
Security > Certificates > Security Certificates > Root/Intermediate Trusted
Certificate(s) >
Certificate(s) >
5. Click on Install external Root/Intermediate trusted certificates.
6. Browse to the location on your local storage where you stored the Certificate file.
6. Browse to the location on your local storage where you stored the Certificate file.
Select Next.
7. For certificates not already named, enter a Friendly Name for the certificate. Select
OK, or depending on the certificate, progress through the steps by selecting Next.
The security certificates appear in the list of installed certificates.
The security certificates appear in the list of installed certificates.
8. Next, enable Verification of SSL Certificates. Using CentreWare Internet Services,
enable verification of SSL certificates by following this path: Properties > General
Setup > Extensible Service Setup
Setup > Extensible Service Setup
9. On the Extensible Service Setup page, under Browser Settings, uncheck Enable the
Extensible Services Browser, and select Apply.
10. Select OK to dismiss the dialog.
11. Under Browser Settings, check Enable the Extensible Services Browser. Select Apply.
12. Check Verify server certificates and select Apply.
13. Select OK to dismiss the dialog.
11. Under Browser Settings, check Enable the Extensible Services Browser. Select Apply.
12. Check Verify server certificates and select Apply.
13. Select OK to dismiss the dialog.
Enabling “Verify Server Certificates” is a global setting that will affect all Extensible
Interface Platform
Interface Platform
®
(EIP) Applications installed on your device.
Warning
By not enabling verification of SSL certificates, the secure communications of private
or sensitive information is vulnerable. Therefore, it is highly recommended that
verification of SSL certificates be enabled on your MFP.
or sensitive information is vulnerable. Therefore, it is highly recommended that
verification of SSL certificates be enabled on your MFP.
Device Management
Note
To add devices to a Customer Subaccount you must first log in to the Customer
Subaccount.
Subaccount.
How To Add a Device to Xerox
®
App Studio
1. Go to
. Log in to Xerox
®
App Studio.
2. Click the Devices tab.
You must install ActiveX control on the Internet browser to enable device
communication with the Xerox
communication with the Xerox
®
App Studio.
3. If you already have the ActiveX control installed, go to the next step. Otherwise,
enable ActiveX control using one of the following browsers:
Xerox
®
App Studio
2-6
Customer How To and Troubleshooting Guide
How To