Руководство Пользователя для Xerox XCounter Page Accounting Support & Software

Mar 2001 

XCOUNTER FOR NT USER REFERENCE MANUAL 

 

41 

Optionally, XCounter may be configured to send a customized banner with the print 
job. Select from the following banner templates. 

• 

None: No banner printed 

• 

PCL4 (Letter): HP LaserJet Series II or equivalent - letter size paper 

• 

PCL5 (Letter): HP LaserJet III or equivalent - letter size paper 

• 

PCL5/PJL (Letter): HP LaserJet 4 or equivalent - letter size paper 

• 

Postscript (Letter): Any Postscript printer - letter size paper 

• 

PCL4 (A4): HP LaserJet Series II or equivalent - A4 size paper 

• 

PCL5 (A4): HP LaserJet III or equivalent - A4 size paper 

• 

PCL5/PJL (A4): HP LaserJet 4 or equivalent - A4 size paper 

• 

Postscript (A4): Any Postscript printer - A4 size paper 

XCounter has two options for handling duplex printing. If the printer driver is 
configured for duplex printing, and a print job is sent to the printer, XCounter can 
either account for all pages sent to the printer or divide the page count in half. The two 
options are as follows:  

• 

Ignore- XCounter will leave the page count alone. 

• 

Divide page count in half- XCounter will check for duplex print jobs in the data 
stream and divide the total page count by 2. 

XCounter detects duplex printing from print data stream sent to the printer. If the 
printer hardware is setup to print duplex by default, and a print job contains no 
information about duplex data, then XCounter will not detect a duplex print job. The 
printer hardware must be setup to print single-sided by default and allow users to 
specify duplex options using printer drivers. 

XCounter can pause all jobs automatically. Users will have to release each job in 
order for them to be printed - this can be done from the Explorer Printers list or Print 
Manager. 

• 

Standard pause: XCounter pauses the job in the usual manner.