Руководство Пользователя для Xerox Phaser 7500
Troubleshooting
Phaser 7500 Color Printer
User Guide
User Guide
130
Media Misfeeds
Probable Causes
Solutions
The media is not correctly positioned in the tray.
Remove the misfed media and reposition the media
properly in the tray. Ensure that the media guides in
the tray are set correctly.
properly in the tray. Ensure that the media guides in
the tray are set correctly.
The number of sheets in the tray exceeds the
maximum sheets allowed.
maximum sheets allowed.
Remove the excess media and load media below the
fill line.
fill line.
The media guides are not correctly adjusted to the
media size.
media size.
Adjust the media guides in the tray to match the size
of the media.
of the media.
Warped or wrinkled media is loaded in the tray.
Remove the media, smooth it out, and reload it. If it
still misfeeds, do not use that media.
still misfeeds, do not use that media.
The media is moist from humidity.
Remove the moist media and replace it with new, dry
media.
media.
Unsupported media (wrong size, thickness, type, etc.)
is being used.
is being used.
Special media must be loaded in Tray 1 (MPT) only.
Use Xerox-approved media. See
Use Xerox-approved media. See
The recommended transparency or label sheet is
facing the wrong way in Tray 1 (MPT).
facing the wrong way in Tray 1 (MPT).
Load the transparencies or label sheets according to
the manufacturer’s instructions.
the manufacturer’s instructions.
Envelopes are loaded incorrectly in the tray..
Envelopes must be loaded LEF. To use SEF, you must
define a SEF custom size.
define a SEF custom size.
The media feed roller is dirty.
Clean the media feed roller. For more details, see