Руководство По Установке для Xerox Phaser EX7750
7
7-8
Administering the EX7750
6.
Select Restore system from the following menu.
7.
When the following screen appears, make sure “Yes” is displayed, and then select OK.
The restore backup process begins immediately and takes approximately three
minutes.
The restore backup process begins immediately and takes approximately three
minutes.
Wait while the Control Panel displays screens indicating that the software is being
restored.
restored.
8.
At the message “Restore complete!” select OK.
9.
Scroll to Exit and select OK.
10.
At the message “Remove CD and recycle power,” remove the Restore/Update Server
Software CD from the DVD drive. Then, using the power switch on the back panel,
power off the system, wait 10 seconds, and then power the system back on.
Software CD from the DVD drive. Then, using the power switch on the back panel,
power off the system, wait 10 seconds, and then power the system back on.
Select Option:
Restore system
OK
Restore/Update CD
Select Option:
Update system
OK
Restore/Update CD
Select Option:
Exit
OK
Restore/Update CD
Press the 4th line selection button
Do not use Update in this procedure
All data will be
deleted. Continue?
deleted. Continue?
Yes
Install XPe
OK
Press the 4th line selection button