Листовка для Xerox Phaser EX7750
2
2-19
Calibrating the EX7750 with the DTP32 or DTP32HS
For Input Tray, specify the paper source.
6.
Retrieve the measurement page from the printer.
7.
Click Measure in the Get Measurements pane.
The Measurement Options dialog box displays the specified Page Type and Paper Size
options.
options.
8.
Click Measure.
In the dialog box that appears, follow the directions for feeding the measurement page
through the DTP32 or DTP32HS.
through the DTP32 or DTP32HS.
N
OTE
:
For the DTP32HS, disregard any instruction regarding the page guide. The
DTP32HS does not have an edge guide for the page. Instead, position the page so that
the strip to be measured is lined up directly under the alignment mark.
the strip to be measured is lined up directly under the alignment mark.
The Status field displays instructions for selecting the port and feeding the
measurement page through the DTP32 four times, once for each color strip.
measurement page through the DTP32 four times, once for each color strip.