Руководство По Установке для Xerox Phaser EX7750

If users cannot connect to the EX7750, check the following:

• EX7750 Setup—the appropriate network protocol must be enabled, with the correct 

parameters (for example, for TCP/IP, the IP address), and you must publish either 
the Print queue or Hold queue. 

You can check these settings quickly by printing a Configuration page.

• On the client workstation—the appropriate network protocol(s) must be loaded, 

and your Windows directory should contain a configured Efinl.ini file.

If there is a problem connecting to the EX7750, an error message is displayed.

The problem can occur when:

• The EX7750 is initially turned on.

• The EX7750 restarts.

• You have changed settings affecting the server address and have not reconfigured the 

connection to the server.

If you see this problem, try the following solutions, in this order:

• A remote workstation running Fiery utilities or WebTools may be interfering by 

obtaining status information. If possible, close the remote application, and try to 
connect again.

• Restart the Command WorkStation or Command WorkStation LE software and try 

to connect again.