Листовка для Xerox Phaser 7300
Trays
Phaser® 7300 Color Printer
5
4.
Insert a stack of paper into the tray. Depending on the size and type of paper, load the paper
long-edge feed or short-edge feed. For information on custom size paper, refer to page 8.
long-edge feed or short-edge feed. For information on custom size paper, refer to page 8.
5.
Slide the tray back into the printer and turn to the front panel.
6.
When the front panel prompts you:
■
If you haven’t changed the type of paper, press the OK key to accept the current setting for
paper type.
paper type.
■
If you have changed the type of paper, scroll to the correct paper type and press the OK key
to save your selection.
to save your selection.
Note
To avoid possible print-quality and paper-feed problems, make sure that the tray’s paper type
setting matches the loaded paper type.
setting matches the loaded paper type.
Long-edge feed
Short-edge feed
■
Use for the following sizes: Letter, A4, and
B5 JIS.
■
Use for transparencies (in Tray 1 only).
Transparencies should NOT be loaded in
Trays 2 - 5.
■
Place the side to be printed facedown with the top
of the page at the back of the tray.
■
Prepunched holes should be on your right as you
face the printer.
■
Use for the following sizes: Legal, Tabloid
(11 x 17 in.), Tabloid Extra (12 x 18 in.),
Executive, US Folio, A3, SRA3, A5, A6, and
B4 JIS.
■
Place the side to be printed facedown with the top
of the page on your right as you face the printer.
■
Prepunched holes should be towards the front of
the tray.
7300-38
PHASER
7300
7300-39
PHASER
7300
OK
6200-45