Руководство Пользователя для Xerox Phaser 5335

A.5 Installing Additional Memory

189

In case of the following situations, install additional memory to the printer.
• When [Print Page Mode] is set to [On] on your print driver 

Setting [Print Page Mode] to [On] changes the printing method of the printer. When 

printing large data, or when the printer is taking too much time to print, set [Print Page 

Mode] to [On] and try printing again.

• When the [Out of memory] message appears frequently on the control panel

Additional memory may also be required depending on the [Print Mode] setting on the print 

driver and the paper size to be printed.
The following table lists the required memory capacity.

Output possible

: Most data can be printed. However, some data may not be 

printed depending on the type of print data, or the print speed 

may decrease when 2-sided printing is performed.

Recommended capacity: Memory capacity recommended by Xerox.

Values of the required memory capacity also vary depending on the usage environment of 

the printer.

Note
• When using long paper, 2-sided printing and the printing in the [High Quality] print mode are not 

available.

• For more information about additional memory and how to order it, refer to "A.2 Optional Accessories" 

PCL

print driver

Standard

A5

Standard

(64 MB)

Standard

(64 MB)

Standard

(64 MB)

Standard

(64 MB)

B4

A4

8.5 x 14"

Long paper

(297 x 900 mm)

-

-

High 

Quality

A5

Standard

(64 MB)

Standard

(64 MB)

Standard

(64 MB)

Standard

(64 MB)

B5

320 MB

(Standard +

256 MB)

320 MB

(Standard +

256 MB)

A4

8.5 x 14"