Руководство По Установке для Xerox Phaser 750
26
PhaserShare Networking Manual
TCP/IP Host Configuration (UNIX)
Assigning a print queue to the printer
■
For BSD systems, edit the /etc/printcap file and add a spool directory (for example, to
/usr/spool/lpd).
/usr/spool/lpd).
■
For System V hosts, configure the queue as a remote BSD print queue (support for
TCP/IP LPR is required). Specific instructions for the following System V hosts are
provided in this manual:
TCP/IP LPR is required). Specific instructions for the following System V hosts are
provided in this manual:
■
■
■
■
Note
Some UNIX hosts report an error when you configure a print queue that is not
currently on the network; ignore this message.
currently on the network; ignore this message.
Assigning print queues with PhaserPrint for UNIX
For UNIX environments, Tektronix offers PhaserPrint for UNIX software, which provides
fast raster printing and a graphical user interface with push-button control of printer
features. For more information on PhaserPrint software, see your printer’s networking
setup guide.
fast raster printing and a graphical user interface with push-button control of printer
features. For more information on PhaserPrint software, see your printer’s networking
setup guide.
If you want to print using PhaserPrint for UNIX software, you must use PhaserPrint
software to configure your host. Refer to the PhaserPrint for UNIX user manual or the
instructions provided with the PhaserPrint for UNIX CD-ROM for configuration
information. A PDF version of the manual is available from the Tektronix ftp site:
software to configure your host. Refer to the PhaserPrint for UNIX user manual or the
instructions provided with the PhaserPrint for UNIX CD-ROM for configuration
information. A PDF version of the manual is available from the Tektronix ftp site:
ftp.tek.com/cpid/UNIX/phaserprint2.1/demo/MANUALS
Required remote printer queue names
The printer’s internal LPR queue uses the BSD protocol; its known queues are listed in the
following table. These are the only remote queue names that the printer recognizes. If you
use another name, the printer automatically defaults to AUTO.
following table. These are the only remote queue names that the printer recognizes. If you
use another name, the printer automatically defaults to AUTO.
Queue name
Language
PS
PostScript
PCL
PCL (Printer Control Language)
AUTO
Automatic Language Selection (the printer automatically senses
the language of the print job and processes it accordingly)
the language of the print job and processes it accordingly)