Руководство По Установке для Xerox Phaser 1235
7.
Click Next>.
8.
Click the Local Printer radio button.
9.
Click Next>.
10.
Click the Create a New Port radio button.
11.
Select the AppleTalk Printing Devices from the New Port Type
pull-down menu.
pull-down menu.
12.
You are now presented with a list of zones discovered on the
network. Double-click the Zone Name your printer is on to
expand the list. Now select your printer from the list, and click
network. Double-click the Zone Name your printer is on to
expand the list. Now select your printer from the list, and click
OK.
13.
You may now capture the AppleTalk Device. Doing so will
prevent others from printing to this device. In most applications it
is best to select No. If you are installing the printer port on a
server that will act as a single print queue for this device, then
click Yes.
prevent others from printing to this device. In most applications it
is best to select No. If you are installing the printer port on a
server that will act as a single print queue for this device, then
click Yes.
14.
Insert your printer CD-ROM into your computer’s CD-ROM disk
drive and click Have Disk.
drive and click Have Disk.
15.
Click the Browse button and select the directory containing the
Windows 2000 drivers: (<CD Drive>:\instal\win2k), then click
Windows 2000 drivers: (<CD Drive>:\instal\win2k), then click
Open.
16.
Select the *.INF file, then click OK.
17.
The Wizard will return you to the previous dialog. Verify that the
path and file name are correct, and click OK.
path and file name are correct, and click OK.
18.
At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, then click Next>.
you want that printer to be the default, then click Next>.
19.
If the printer will not be shared, click Next>. To share the printer,
enter a Share Name, check the share checkbox, then click Next>.
enter a Share Name, check the share checkbox, then click Next>.
20.
At the next dialog, it is recommended that you print a Test Print.
Click Next>.
Click Next>.
21.
The Completing the Add Printer Wizard window will come up. If
all the data presented is correct, click the Finish button. If not,
click the <Back button to correct any errors.
all the data presented is correct, click the Finish button. If not,
click the <Back button to correct any errors.
22.
Wait for the Test Print to print. A new dialog will ask for
confirmation of the Test Print; click Yes.
confirmation of the Test Print; click Yes.
23.
Send a print job to the printer.