Руководство Администратора для Xerox Phaser 3320
Properties
Xerox Phaser 3320DN/3320DNI
System Administrator Guide
System Administrator Guide
90
•
Restore Default
1.
At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
Address Bar.
2.
Press Enter.
3.
Select the Properties icon.
4.
If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
5.
Click Properties.
6.
In the Network Settings link select the General link.
General
The General page allows you to set the Ethernet Speed and view the device MAC address. For
instructions on how to set the Ethernet Speed, refer to
instructions on how to set the Ethernet Speed, refer to
Setting the Ethernet Speed Using Internet
Services
on page 20.
TCP/IP
The TCP/IPv4 and TCP/IPv6 pages allow you to configure the TCP/IP settings on the device. For
instructions refer to
instructions refer to
Network Installation
on page 23.
Raw TCP/IP, LPR, IPP
The Raw TCP/IP, LPR IPP page allows you to configure the Raw TCP/IP (Port 9100), LPR (Line Printer
Remote) and IPP (Internet Printing Protocol) settings on the device. For instructions, refer to
Remote) and IPP (Internet Printing Protocol) settings on the device. For instructions, refer to
Windows
Printing
on page 49.
Telnet
The Telnet page allows you to configure Telnet settings on the device.
1.
In the Network Settings link select the Telnet link.
2.
Select Enable to enable the Telnet Protocol.
3.
Enter the required information to configure the following settings:
•
Port Number
•
Login ID
•
Password
4.
Select Apply to save the settings.
WSD
The WSD page allows you to enable the WSD protocol on the device.
1.
In the Network Settings link select the WSD link.
2.
Select Enable to enable the WSD Protocol.
3.
Select Apply to save the settings.