Руководство По Установке для Xerox Phaser 300X
Printing From a Macintosh
2
Printing Reference
2-17
Using the Phaser 300X GX driver
If you are using Apple Macintosh QuickDraw GX, use the Phaser 300X GX
driver to print to your Phaser 300X printer.
driver to print to your Phaser 300X printer.
■
The Phaser 300X GX driver works with QuickDraw GX and
non-QuickDraw GX applications.
non-QuickDraw GX applications.
■
QuickDraw GX does not work with non-QuickDraw GX printer
drivers. If you want to print from non-QuickDraw GX
applications with a driver such as the Adobe PSPrinter, you must
first disable QuickDraw GX; see page 2-28 for instructions.
drivers. If you want to print from non-QuickDraw GX
applications with a driver such as the Adobe PSPrinter, you must
first disable QuickDraw GX; see page 2-28 for instructions.
System requirements
Note
You must have an optional PhaserShare card installed in the
printer before using the installed software.
printer before using the installed software.
The Tektronix Phaser 300X GX printer driver requires the following
hardware and software:
hardware and software:
■
An Apple Macintosh II computer, or later
■
At least 8 Mbytes of RAM
■
QuickDraw GX
Installing the Phaser 300X GX printer driver
1.
Follow the instructions in “Using the Macintosh Installer” on
page 4 to install the Phaser 300X GX printer driver.
page 4 to install the Phaser 300X GX printer driver.
Select Easy Install to automatically install the printer’s software,
or select the Phaser 300X GX printer driver option in the Custom
Install window on the printer’s CD-ROM.
or select the Phaser 300X GX printer driver option in the Custom
Install window on the printer’s CD-ROM.
The driver is only installed if you are running QuickDraw GX on
your Macintosh.
your Macintosh.
2.
Go on to page 2-18 for instructions on creating a desktop printer.