Руководство По Установке для Xerox DocuColor 12 Printer with Fiery EX12
2
2-7
Installing Fiery software and fonts
3.
Enter the appropriate information for the Fiery.
Nickname
—Enter a name for the Fiery. It does not have to match the actual server
name of the Fiery.
N
OTE
:
The nickname cannot contain any of the following seven characters:
[ ] _ " ' <space> <tab>
Protocol
—TCP/IP is the only supported network protocol, so no selection is necessary.
Server Name
—Enter the IP address (or DNS or hosts name) of the Fiery.
New Device
—Enter the name of the device the Fiery is connected to:
DC12
or
DC2000
.
This device name appears in the Printer Setup section of the Configuration page.
N
OTE
:
The device name is case sensitive; enter it exactly as it appears here.
4.
When you have added all the information, click Add.
5.
With the device name selected in the Devices list, click OK.
The Fiery appears in the list of available servers. The first line of the entry displays the
nickname you gave the server, followed by the protocol. The second line displays the
device name.
nickname you gave the server, followed by the protocol. The second line displays the
device name.
6.
With the device name selected in the list of Available Servers, click Select to begin
using ColorWise Pro Tools.
using ColorWise Pro Tools.
Device name of the Fiery
(DC12 or DC2000)
(DC12 or DC2000)