Руководство Администратора для Xerox DocuColor 12 Printer with Fiery EX12
DOCUCOLOR 12 PRINTER SYSTEM ADMINISTRATION GUIDE 4–23
MAINTENANCE
1
2
4
5
6
7
4
WARNING: The fuser can be very hot. To avoid
personal injury, wait at least 20 minutes before
performing the next step to allow the fuser to cool.
Do not touch any component other than those
indicated in the following procedure.
personal injury, wait at least 20 minutes before
performing the next step to allow the fuser to cool.
Do not touch any component other than those
indicated in the following procedure.
4
Press down on the Front and Rear Release
buttons on the top of the fuser assembly, to
unlatch the Cleaning Web (area E). The web
opens to the right of the Paper Path Module.
buttons on the top of the fuser assembly, to
unlatch the Cleaning Web (area E). The web
opens to the right of the Paper Path Module.
5
Gently push down on the Cleaning Web (E) and
pull it toward the right to remove the web from the
printer.
pull it toward the right to remove the web from the
printer.
6
Place the Cleaning Web in a bag and dispose of
the web according to local regulations.
the web according to local regulations.
Figure 38: Allow the fuser to cool
Figure 39: Unlatching the Cleaning Web
Figure 40: Removing the Cleaning Web
E