Справочник Пользователя для Craftsman DD2015K
6 - English
FEATURES
PRODUCT SPECIFICATIONS
Chuck ...........................................................3/8 in. Keyless
Motor ...............................................................19.2 Volt DC
Switch .............................. VSR (Variable Speed Reversible)
Motor ...............................................................19.2 Volt DC
Switch .............................. VSR (Variable Speed Reversible)
No Load Speed ...................................0 - 600 r/min. (RPM)
Clutch .............................................................. 24 Positions
Torque ................................................................... 250 in.lb.
Clutch .............................................................. 24 Positions
Torque ................................................................... 250 in.lb.
WARNING:
Do not attempt to modify this
product or create accessories or attachments not
recommended for use with this product. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
recommended for use with this product. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
1-800-932-3188 for assistance.
INCLUDES:
Drill-Driver, Double-ended Bit, and
Operator’s Manual
WARNING:
Do not use this product if it is not
completely assembled or if any parts appear to
be missing or damaged. Use of a product that is
not properly and completely assembled or with
damaged or missing parts could result in serious
personal injury.
be missing or damaged. Use of a product that is
not properly and completely assembled or with
damaged or missing parts could result in serious
personal injury.
ASSEMBLY
OPERATION
WARNING:
Do not allow familiarity with tools to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious injury.
fraction of a second is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from
the tool when you are assembling parts, making
adjustments, cleaning, or when not in use. Removing
battery pack will prevent accidental starting that
could cause serious personal injury.
adjustments, cleaning, or when not in use. Removing
battery pack will prevent accidental starting that
could cause serious personal injury.
WARNING:
Always wear eye protection with side
shields marked to comply with ANSI Z87.1. Failure to
do so could result in objects being thrown into your
eyes resulting in possible serious injury.
do so could result in objects being thrown into your
eyes resulting in possible serious injury.
WARNING:
Do not use any attachments or
accessories not recommended by the manufacturer
of this tool. The use of attachments or accessories
not recommended can result in serious personal
injury.
of this tool. The use of attachments or accessories
not recommended can result in serious personal
injury.
APPLICATIONS
You may use this product for the purposes listed below:
Drilling in all types of wood products (lumber, plywood,
paneling, composition board, and hard board), ceramics,
plastics, fiberglass, laminates, and metals; driving screws
into wood and drywall with screwdriver bits
paneling, composition board, and hard board), ceramics,
plastics, fiberglass, laminates, and metals; driving screws
into wood and drywall with screwdriver bits
VARIABLE SPEED SWITCH TRIGGER
See Figure 1, page i.
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with de-
creased trigger pressure.
To turn the drill
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with de-
creased trigger pressure.
To turn the drill
ON, depress the switch trigger. To turn
it
OFF, release the switch trigger and allow the chuck to
come to a complete stop.
NOTE: A whistling or ringing noise coming from the
switch during use is a normal part of the switch function.
NOTE: Running at low speeds under constant usage may
cause the drill to become overheated. If this occurs, cool
the drill by running it without a load and at full speed.
NOTE: A whistling or ringing noise coming from the
switch during use is a normal part of the switch function.
NOTE: Running at low speeds under constant usage may
cause the drill to become overheated. If this occurs, cool
the drill by running it without a load and at full speed.