Справочник Пользователя для Craftsman 71-242223X

13

 MAINTENANCE SCHEDULE
 

Fill in dates as you

  complete regular service.

 Check for loose fasteners

X

 Check for worn or damaged parts  

X

X

 Clean, inspect & lubricate wheel bearings  

X

 Clean Sweeper

X

X

 Clean, inspect & lubricate gears

X

•

Clean sweeper housing with a soft brush or cloth.

•

Clean debris from hopper bag with a brush or broom.

•

Remove any material which has wrapped around 
brushes or ends of brush shaft.

•

Read and follow the maintenance schedule and the 
procedures listed in the maintenance section.

Bef

ore each use

Aft

er

each

use

Twice

a

year

Ev

ery

year

Bef

ore st

orage

Service Dates

•

Clean the sweeper after each use.

•

Inspect for worn or damaged parts, such as brushes
and wheels.

•

Every year, remove the wheels and clean the gear
teeth and the teeth on the back side of the wheel.
After cleaning, lubricate the axle, and the teeth on
the gears and the wheel with a light coat of grease. 
To remove the right wheel, unscrew the wing knob
and remove the wheel and washers. To remove the
left wheel, pop off the hub cap using a screwdriver
and remove wheel along with the bolt, washers, step
spacer and nut. See figures 22 and 23.

•

Clean the sweeper and hopper bag thoroughly to help
prevent rust and mildew.

•

To collapse the hopper bag for storage, remove the
two hopper support rods from the rear of the hopper.

•

Store in a dry area.

Before storing the 

sweeper, always empty the hopper bag to
avoid spontaneous combustion.