Инструкции По Установке для Honeywell Bypass Drum Humidifier (HE120A)

Скачать
Страница из 16
HE120 BY-PASS DRUM HUMIDIFIER
69-1110EF—02
HOW YOUR HUMIDIFIER WORKS
Your Honeywell humidifier uses the principle that vapor (evaporated water) is created 
when warm air blows over a water soaked area. As the vapor circulates, the relative 
humidity rises.
Your humidity control monitors the relative humidity and activates the humidifier 
accordingly. The humidifier has a water supply that disburses water evenly over a 
humidifier pad. The warm dry air from the furnace passes over the humidifier pad and 
picks up the moist air to circulate it through your home. 
Humidified air feels warmer and more comfortable so you may be able to lower your 
thermostat heating setpoint and save money on your heating fuel bills. The end result 
is that your humidifier gives you a comfortable environment that is also energy 
efficient.
OPERATING YOUR HUMIDIFIER
Your HE120 Honeywell humidifier is controlled by 
the Humidity Control that is installed either on the 
return air duct or on an interior wall in your living 
area. Choose the humidity control setting using the 
combination relative humidity/outdoor temperature 
setting scale on your humidity control. Match the 
dial setting to the outdoor temperature for 
optimizing the humidity level while reducing the 
moisture condensation on your windows. The table 
below can also be used to adjust the humidity 
control to the recommended setting.
NOTE: As the outside temperature drops, the recommended humidity control setting 
is lowered to accommodate for the effects of dewpoint. These settings should 
reduce the accumulation of moisture and ice on your windows and in other 
areas of your home. 
Some indoor activities such as cooking, showering and clothes drying can cause 
excessive levels of humidity and start the accumulation of moisture on your windows. 
NOTE: If this condition persists for more than a few hours, set the humidity control to 
the lowest setting to turn off the humidifier. If the condition does not improve, 
ventilate your home to remove the moisture.
At Outside 
Temperature
Recommended 
Setting
At Outside 
Temperature
Recommended 
Setting
-20°F (-29°C)
Low
+10°F (-12°C)
Med
-10°F (-23°C)
Low
+20°F (-7°C)
High
0°F (-18°C)
Med
Above 20° (-7°C)
High
M13608