Инструкции Пользователя для Honeywell MM14CCS

It is important that the installation instructions below are followed for successful installation of this 

portable air conditioner. Please call Customer Support if you have any difficulties or queries regarding 

these installation procedures.

1. Install the plastic hose with window bracket adapter and hose connector on both sides. 

Ensure proper fit on both ends.

2. Adjust the window bracket as per width or 

height of your window and insert the plastic pins 
to fix at the desired position. There is a hole 
where the Plastic Hose will be inserted later. 
Make sure this hole is not blocked.

3. Connect the plastic hose to the hose 

connector on back of the unit. Push-in until it 
is locked in place.

4. Connect the window bracket to the opposite 

end of the plastic hose. Ensure that all 
connections are tight and installed properly.

Note:

After setting the window bracket to the size of your 

window, please remove it from the window and 

follow the instructions below.

1.
2.
3.
4.
5.

Window Bracket Kit.............................
Window Bracket Panel Adapter...........
Plastic Pin............................................
Hose Connector..................................
Plastic Hose........................................

Installation Kit:

Installation Steps:

1 Set
1 Piece
2 Pieces
1 Piece
1 Piece

Plastic Pin

Hole for Plastic Hose

20" to 47" (50.5cm to 119cm)

5. Connect the window bracket to the window.

6. The Portable Air Conditioner is now ready to use.

1

2

5

3

x 1

x 1

x 1

x 2

x 1

4

EN

3

Plastic Hose: 
Dia. 5" (12.7cm)
Length: 12" to 47" (30cm~120cm)