Справочник Пользователя для Zanussi ZOK37901XB

2. Pull the rear end of the shelf support away

from the side wall and remove it.

Install the shelf supports in the opposite

sequence.

You can remove the door and the internal glass

panels to clean it. The number of glass panels is

different for different models.

Be careful when you remove the

door from the appliance. The door is

heavy.

1. Open the door fully.

2. Fully press the clamping levers (A) on the

two door hinges.

3. Close the oven door to the first opening

position (approximately 70° angle).

4. Hold the door with one hand on each side

and pull it away from the appliance at an

upwards angle.

5. Put the door with the outer side down on a

soft cloth on a stable surface. This is to

prevent scratches.

6. Hold the door trim (B) on the top edge of

the door at the two sides and push inwards

to release the clip seal.

2

1

7. Pull the door trim to the front to remove it.

8. Hold the door glass panels on their top

edge one by one and pull them up out of

the guide.

9. Clean the glass panel with water and soap.

Dry the glass panel carefully.

When the cleaning is completed, install the

glass panels and the door. Do the above steps

in the opposite sequence. Install the smaller

panel first, then the larger.

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The top lamp

1. Turn the lamp glass cover counterclockwise

to remove it.