Справочник Пользователя для Zanussi ZEN6641XBA
Problem
Possible cause
Remedy
The hob deactivates.
You put something on the sensor
field .
field .
Remove the object from the sen-
sor field.
Residual heat indicator does not
come on.
The zone is not hot because it
operated only for a short time.
If the zone operated sufficiently
long to be hot, speak to an Au-
thorised Service Centre.
Automatic Heat Up function does
not operate.
The zone is hot.
Let the zone become sufficiently
cool.
The highest heat setting is set.
The highest heat setting has the
same power as the function.
You decreased the heat setting
to .
to .
Start from and only increase
the heat setting.
You cannot activate the outer
ring.
Activate the inner ring first.
There is a dark area on the
multiple zone.
It is normal that there is a dark
area on the multiple zone.
The heat setting changes be-
tween two levels.
Power management function op-
erates.
Refer to "Daily use" chapter.
The sensor fields become hot.
The cookware is too large or you
put it too near to the controls.
Put large cookware on the rear
zones if possible.
comes on.
Automatic Switch Off operates.
Deactivate the hob and activate it
again.
comes on.
The Child Safety Device or the
Lock function operates.
Refer to "Daily use" chapter.
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is incorrect.
Use the correct cookware.
Refer to “Hints and tips” chapter.
The diameter of the bottom of the
cookware is too small for the
zone.
Use cookware with correct di-
mensions.
Refer to “Technical information”
chapter.
12
www.zanussi.com