Справочник Пользователя для Zanussi ZWI71000WA

• If it is necessary, wait until the water has cooled

down.

• Place a container

close to the pump (A)

to collect any spillage.

• Pull out the

emergency emptying

hose (B), place it in

the container and

remove its cap.

• When no more water

comes out, unscrew

the filter.

• Turn the filter anti-

clockwise.

• Remove the filter.

• Use pliers, if

necessary.

• When removing the

filter, always keep a

rag nearby to dry up

any water spillage.

• Clean the filter under

a tap, to remove any

traces of fluff.

• Remove foreign

bodes and fluff from

the filter seat and from

the pump impeller.

• Check carefully

whether the pump

impeller rotates (it

rotates jerkily).

If it doesn’t rotate, please contact your Service

Centre.

• Put the cap back on

the emergency

emptying hose and

place the latter back

in its seat.

• Replace the filter into

the pump, insert it

correctly into the

special guides.

• Screw the pump cover firmly. Turn it clockwise.

CAUTION! When the appliance is in

use and depending on the set

programme there can be hot water in

the pump.

Never remove the filter during a washing cycle,

always wait until the appliance has finished the

cycle, and is empty.
When refitting the filter, ensure it is securely re-

tightened so as to stop leaks and young children

being able to remove it.

FILTER
If the appliance doesn't fill, take long to fill with

water, the starting button blinks or the display (if

available) shows the relevant alarm (see chapter

'Troubleshooting' for more details), check if the

water inlet filters are blocked.
To clean the water inlet filters:

• Turn off the water tap.

• Unscrew the hose

from the tap.

• Clean the filter in the

hose with a stiff brush.

• Screw the hose back onto the tap. Make sure

the connection is tight.

• Unscrew the hose

from the machine.

• Keep a rag nearby

because some water

may flow.

• Clean the filter in the

valve with a stiff brush

or with the piece of

cloth.