Справочник Пользователя для Zanussi ZRB36104WA

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the After Sales Service.

The appliance is equipped with a

longlife LED interior light.

Disconnect the plug from the mains

socket.

1. At the same time, with the fingers expand

up and down the transparent cover and

unhook it in the direction of the arrows.

2. Replace the lamp with one of the same

power and shape, specifically designed for

household appliances. (the maximum power

is shown on the light bulb cover).

3. Reassemble the lamp cover.

4. Connect the plug to the mains socket.

5. Open the door. 

Make sure that the light comes on.

Refer to Safety chapters.

This appliance can be installed in a dry, well

ventilated indoor where the ambient

temperature corresponds to the climate class

indicated on the rating plate of the appliance:

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Some functional problems might

occur for some types of models

when operating outside of that

range. The correct operation can

only be guaranteed within the

specified temperature range. If you

have any doubts regarding where to

install the appliance, please turn to

the vendor, to our customer service

or to the nearest Service Centre

• Before plugging in, ensure that the voltage

and frequency shown on the rating plate

correspond to your domestic power supply.

• The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power

supply socket is not earthed, connect the

appliance to a separate earth in compliance

with current regulations, consulting a

qualified electrician.

• The manufacturer declines all responsibility if

the above safety precautions are not

observed.

• This appliance complies with the E.E.C.

Directives.