Справочник Пользователя для Zanussi ZBT23420SA

T

+16°C to + 43°C

Some functional problems might

occur for some types of models

when operating outside of that

range. The correct operation can

only be guaranteed within the

specified temperature range. If you

have any doubts regarding where to

install the appliance, please turn to

the vendor, to our customer service

or to the nearest Service Centre

• Before plugging in, ensure that the voltage

and frequency shown on the rating plate

correspond to your domestic power supply.

• The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power

supply socket is not earthed, connect the

appliance to a separate earth in compliance

with current regulations, consulting a

qualified electrician.

• The manufacturer declines all responsibility if

the above safety precautions are not

observed.

• This appliance complies with the E.E.C.

Directives.

The airflow behind the appliance must be

sufficient.

5 cm

min. 200cm

2

min.

200cm

2

Before carrying out any operations,

remove the plug from the power

socket.

To carry out the following

operations, we suggest that this be

made with another person that will

keep a firm hold on the doors of the

appliance during the operations.

1. Loosen the upper pin and remove the

spacer.

2. Remove the upper pin and the upper door.

3. Loosen the middle hinge.

4. Remove the lower door.

5. Loosen the lower pin.

6. Install the lower pin on the opposite side.

7. Tighten the middle hinge.

8. Install the upper door.

9. Tighten the spacer and tighten the upper

pin.