Справочник Пользователя для Zanussi ZCG552GNC

To replace the glass panels, do the

same steps in reverse. Before you

lower the trim, attach the A trim part

to the door. Refer to the graphic.

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

Danger of electrocution! Disconnect

the fuse before you replace the

lamp. The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

The lamp glass cover is at the back

of the cavity.

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a suitable 300

°C heat-resistant oven lamp. 

Use the same oven lamp type.

4. Install the glass cover.

Refer to Safety chapters.

You cannot activate the appli-

ance.

The appliance is not connected

to an electrical supply or it is

connected incorrectly.

Check if the appliance is correct-

ly connected to the electrical

supply.

You cannot activate the appli-

ance.

The fuse is released.

Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.

You cannot activate the appli-

ance.

The appliance is too hot.

Wait for the appliance to cool

down.

The burners do not work.

There is no gas supply.

Check the gas connection.

There is no spark when you try to

activate the spark generator.

Burner cap and crown are placed

incorrectly.

Place the burner cap and crown

correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep the

knob pushed for equal or less

than 10 seconds.

The flame ring is uneven.

Burner crown is blocked with

food residues.

Make sure that the injector is not

blocked and the burner crown is

clean.