Справочник Пользователя для Zanussi ZQF11431DA
Problem
Possible cause
Solution
There is no voltage in the mains
socket.
Connect a different electrical ap-
pliance to the mains socket. Con-
tact a qualified electrician.
The appliance is noisy.
The appliance is not supported
properly.
Check if the appliance stands
stable.
Audible or visual alarm is on.
The cabinet has been recently
switched on or the temperature is
still too high.
Refer to "Door Open Alarm"or
"High Temperature Alarm".
The temperature in the appliance
is too high.
Refer to "Door Open Alarm"or
"High Temperature Alarm".
The door is left open.
Close the door.
Power indicator light is flashing.
An error has occurred in measur-
ing the temperature.
Contact a qualified electrician or
contact the nearest Authorized
Service Centre.
The appliance is not working
properly.
Contact a qualified electrician or
contact the nearest Authorized
Service Centre.
The temperature in the appliance
is too high.
Contact a qualified electrician or
contact the nearest Authorized
Service Centre.
The compressor operates contin-
ually.
Temperature is set incorrectly.
Refer to "Operation" chapter.
Many food products to be frozen
were put in at the same time.
Wait some hours and then check
the temperature again.
The room temperature is too
high.
Refer to climate class chart on
the rating plate.
Food products placed in the ap-
pliance were too warm.
Allow food products to cool to
room temperature before storing.
The door is not closed correctly.
Refer to "Closing the door".
The QuickFreeze function is
switched on.
Refer to "QuickFreeze function".
There is too much frost and ice.
The door is not closed correctly
or the gasket is deformed/dirty.
Refer to "Closing the door".
The water drainage plug is not
correctly positioned.
Position the water drainage plug
in the correct way.
Food products are not wrapped
properly.
Wrap the food products better.
Temperature is set incorrectly.
Refer to "Operation" chapter.
www.zanussi.com
9