Справочник Пользователя для Zanussi ZWD71463NW

• The programme starts, the door locks, the

display shows the indicator 

.

• The drain pump can operate for a short time

when the appliance fills water.

After approximately 15 minutes from

the start of the programme:

• The appliance adjusts automatically

the programme duration agree with

the laundry load.

• The display shows the new value.

1. Press 

 again and again until the display

shows the delay you want to set.

The related indicator comes on the display.
2. Press 

 :

• The appliance starts the countdown.

• The door locks, the display shows the

indicator 

.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the set of

the delay start before you press the

. To cancel the delay start:

• Press 

 to set the appliance

to pause.

• Press 

 until the display

shows  '.

• Press 

 again to start the

programme immediately.

CHANGING THE OPTIONS
You can change only some options before they

operate.
1. Press 

 .

The indicator flashes.

2. Change the options.
3. Press 

 again.

The programme continues.

1. Turn the programme knob to position   to

cancel the programme and to deactivate the

appliance.

2. Turn the programme knob again to activate the

appliance. Now, you can set a new washing

programme.

Before starting the new programme

the appliance could drain the water. In

this case, make sure that the detergent

is still in the detergent compartment, if

not fill the detergent again.

CAUTION! If the temperature and

level of the water in the drum are too

high and the drum still rotates, you

cannot open the door.

While a programme or the delay start operates, the

appliance door is locked and the display shows the
indicator 

.

programme or the delay start operates:
1. Press 

 to pause the appliance.

2. Wait until the door lock indicator 

 goes off.

3. Open the door.
4. Close the door and press again 

.

The programme or delay start continues to operate.

AT THE END OF THE PROGRAMME
• The appliance stops automatically.

• The acoustic signal operates (if it is activated).
• In the display   comes on.
• The indicator of the 

 goes off.

• The door lock indicator 

 goes off.

• You can open the door.

• Remove the laundry from the appliance. Make

sure that the drum is empty.

• Close the water tap.
• Turn the programme knob to position   to

deactivate the appliance.

• Keep the door ajar, to prevent the mildew and

odours.

• The drum turns regularly to prevent the creases

in the laundry.

• The door lock indicator 

 is on. The indicator

 flashes. The door stays locked.

• You must drain the water to open the door.
To drain the water: