Справочник Пользователя для Zanussi ZWT71201WA

CAUTION! Do not use alcohol,

solvents or chemical products.

DESCALING
If the water hardness in your area is high or

moderate, we recommend that you use a water

descaling product for washing machines.
Regularly examine the drum to prevent limescale

and rust particles.
To remove rust particles use only special products

for washing machines. Do this separately from the

laundry wash.

Always obey the instructions that you

find on the packaging of the product.

MAINTENANCE WASH
With the low temperature programmes it is possible

that some detergent stays in the drum. Perform a

maintenance wash regularly. To do this:
• Remove all laundry from the drum.

• Select the cotton programme with the highest

temperature with a small quantity of detergent.

Regularly examine the

seal and remove all ob-

jects from the inner part.

CLEANING THE DETERGENT DISPENSER
Clean regularly the washing powder and additive

dispenser drawer.

• Press the catch down-

wards and pull it out to

remove the drawer.

• Flush it out under a

tap, to remove any

traces of accumulated

powder.

• Remove the top part of

the additive compart-

ment to aid cleaning.

• Make sure that all

washing powder resi-

due is removed from

the upper and lower

part of the recess.

• Use a small brush to

clean the recess.

• Replace the drawer and run the rinse

programme without any clothes in the drum.

CLEANING THE DRAIN FILTER
The pump should be inspected regularly and

particularly if:
• the appliance does not empty and/or spin;

• the appliance makes an unusual noise during

draining phase due to objects such as safety

pins, coins and so on blocking the pump;

• a problem with water draining is detected (see

chapter 'Troubleshooting' for more details).

CAUTION! Switch the appliance off

and remove the mains plug from the

socket.

Proceed as follows:

• Unplug the appliance.

• If it is necessary, wait until the water has cooled

down.

• Place a container

close to the pump (A)

to collect any spillage.

• Pull out the emergen-

cy emptying hose (B),

place it in the contain-

er and remove its cap.