Справочник Пользователя для Bosch TES 51523 RW

Robert Bosch Hausgeräte GmbH

Fill descaler
Press start

 

● Pour lukewarm water into the empty 

water tank (17) up to the 

0.5 l mark and 

then dissolve 1 Bosch descaling tablet 

TCZ8002 in it. When using TCZ6002, 

2 tablets must be dissolved. 

 

● Press the 

start button (10).

Place container
Press start

 

● Place a receptacle with a capacity of at 

least 1 litre under the outlet (6a).

 

● Press the 

start button (10).

Calc‘n‘Clean in progress

The descaling pro gramme will now run for 

about 22 minutes.

Clean / Fill water tank
Press start

 

● Rinse the water tank (17) and refill it with 

fresh water up to the 

max mark.

 

● Press the 

start button (10).

Calc‘n‘Clean in progress

The descaling pro gramme now runs for 

about 10 minutes and rinses the appliance.

Empty drip tray
Insert drip tray

 

● Empty drip tray (8) and replace them.

Replace the filter if one is being used. The 

appliance has finished cleaning is ready for 

use again.

Important: Wipe down the appliance using 

a soft, damp cloth to immediately remove 

any descaler residue. Such residue can 

cause corrosion. New sponge cloths may 

contain salts. Salts can cause rust film 

on stainless steel and must therefore be 

washed out thoroughly before use.

A

Note: The appliance must be ready for use 

and the water tank (17) filled.

 

● Place a large receptacle under outlet (6a).

 

● Press the l

 / m button (12) and 

 allow the appliance to steam for about 

15 seconds.

 

● Switch the appliance off at the power on/

off switch 

O / I (9).

 

● Empty the water tank (17) and the 

drip tray (8).

The following accessories can be obtained 

from retailers and customer service.

Retail /

Customer service

Cleaning tablets

TCZ6001 / 00310575

Descaling tablets TCZ8002 / 00576694
Water filter

TCZ7003 / 00575491

Care set

TCZ8004 / 00576331

Milk container with 

“Fresh Lock” lid

TCZ8009N / 00576165