Руководство По Обслуживанию для Cisco Cisco PVC300 Pan Tilt Optical Zoom Internet Camera

Configuring Basic Settings

Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE

33

This area contains the settings for the following:

Configuration Type—Two options are available. 

If you are not sure of the IP Address it is best to choose “Obtain IP Address 
Automatically (DHCP)”. If you know your network settings then select “Fixed IP 
Address”. If you choose to obtain an IP Address automatically, then just click Save. 
Otherwise you must fill in the boxes for IP Address, Subnet Mask, Gateway, 
Primary DNS and Secondary DNS. If you know your WINS server addresses you 
can add them but this is not required. 

IP address—The IP Address for your camera will identify your camera on the 
network. 

Subnet mask—The subnet mask for your camera, depending on your network 
settings. The default value is "255.255.255.0". 

Gateway—The IP Address of the gateway router you are using with your camera. 

Primary DNS—A primary domain name server that translates IP addresses to a 
more user-friendly format This is usually assigned by your ISP. 

Secondary DNS—A secondary domain name server to backup the primary 
domain server. 

Primary WINS—If you have this information please add it here, otherwise you can 
leave it blank. 

Secondary WINS—If you have this information please add it here, otherwise you 
can leave it blank. 

PPPoE—If you have a PPPoE account, put your username, password and service 
name in the related boxes. The system will restart when any changes are made to 
this page and saved. 

Enable IPv6—If your network supports IPv6 addressing, check this box and then 
fill in the related boxes with the optional information. Click the IPv6 Info button to 
display the current configuration for IPv6.