Листовка для Quatech SSE-400D-SS
DEVICE SERVER SPECIFICATIONS
5675 Hudson Industrial Parkway Hudson, OH 44236
1.800.553.1170 +1 330.655.9000 www.quatech.com
Rev 1.0
10.06
Ordering Information
LAN Interface
10/100 Base T (IEEE 802.3) auto-negotiation,
auto MDI/MDIX and RJ-45 Ethernet connector
10/100 Base T (IEEE 802.3) auto-negotiation,
auto MDI/MDIX and RJ-45 Ethernet connector
Receiver inputs (RS-232)
Input Voltage Rating: -15V to +15V
Receiver Skew: 120 ns (typ), 250 ns (max)
Input Voltage Rating: -15V to +15V
Receiver Skew: 120 ns (typ), 250 ns (max)
Receiver inputs (RS-422/485)
Input Voltage Rating: -15V to +15V Common
Mode Input Voltage
Receiver Skew: 13 ns (typ)
Input Voltage Rating: -15V to +15V Common
Mode Input Voltage
Receiver Skew: 13 ns (typ)
Transmitter Outputs (RS-232)
High Level Output: +5V (min), +5.4V (typ)
Low Level Output: -5V (min), -5.4V (typ)
Transmitter Skew: 50 ns (typ), 200 ns (max)
High Level Output: +5V (min), +5.4V (typ)
Low Level Output: -5V (min), -5.4V (typ)
Transmitter Skew: 50 ns (typ), 200 ns (max)
Transmitter Outputs (RS-422/485)
Transmitter Outputs: 2V (min) for 100 ohms load
Transmitter Skew: 5 ns (typ), 10 ns (max)
Distance: 4000 feet
Transmitter Outputs: 2V (min) for 100 ohms load
Transmitter Skew: 5 ns (typ), 10 ns (max)
Distance: 4000 feet
Parity, Stop Bits:
Parity configurable as: None, Even, Odd
Data bits configurable as: 5, 6, 7, 8
Stop bits configurable as: 1, 1.5, 2
Parity configurable as: None, Even, Odd
Data bits configurable as: 5, 6, 7, 8
Stop bits configurable as: 1, 1.5, 2
Speed:
Each serial port supports data transfer speeds
of up to 921.6 Kbps, depending on flow control
protocols used, cable length and condition,
and other factors
Each serial port supports data transfer speeds
of up to 921.6 Kbps, depending on flow control
protocols used, cable length and condition,
and other factors
Surge Suppression (SS) Option:
Surge suppression is capable of sustaining up
to 40-A peak, 8x20 Joules transient surges, a
clamping voltage of 30V (RS-232) or 15.5V
(RS-422/485), and a peak energy dissipation of
0.1 Joules
Surge suppression is capable of sustaining up
to 40-A peak, 8x20 Joules transient surges, a
clamping voltage of 30V (RS-232) or 15.5V
(RS-422/485), and a peak energy dissipation of
0.1 Joules
Serial Protocols
xxx-100 series: RS-232
xxx-400 series: software selectable
xxx-100 series: RS-232
xxx-400 series: software selectable
RS-232/422/485
DB-9 Male, External View
Signal Information
Protocols and software
Management: UDP, TCP/IP, HTTP, DHCP,
ARP, ICMP, SNMP (MIB II)
ARP, ICMP, SNMP (MIB II)
Initial IP address configuration: DHCP, static
IP set within the Installation Wizard) or a
custom UDP datagram utility (with command
line interface) for unattended installations
IP set within the Installation Wizard) or a
custom UDP datagram utility (with command
line interface) for unattended installations
Quatech provides several ways to manage,
monitor and configure wireless device servers
after installation:
- Windows® Device Manager (Quatech Device
Manager in Windows NT)
- On-board HTML pages accessible from a
standard web browser
- Simple Network Management Protocol(SNMP)
- Intellisock™ TCP socket services
monitor and configure wireless device servers
after installation:
- Windows® Device Manager (Quatech Device
Manager in Windows NT)
- On-board HTML pages accessible from a
standard web browser
- Simple Network Management Protocol(SNMP)
- Intellisock™ TCP socket services
Communication modes: Normal, Tunneling,
Raw TCP, Auto TCP, Raw UDP or Intellisock
TCP advanced socket services
Raw TCP, Auto TCP, Raw UDP or Intellisock
TCP advanced socket services
OS support
Device drivers provided for Windows NT,
Windows 2000, Windows XP, and Linux
Raw TCP, Raw UDP, Tunneling, AutoTCP and
Intellisock
Device drivers provided for Windows NT,
Windows 2000, Windows XP, and Linux
Raw TCP, Raw UDP, Tunneling, AutoTCP and
Intellisock
TM
modes are O/S independent
Please check Quatech’s website for the latest
O/S driver support information
O/S driver support information
Hardware
Processor: Freescale™ PowerPC®
SDRAM: 8 MB
FLASH Memory: 2 MB
Firmware stored in FLASH may be upgraded
via LAN interface
Processor: Freescale™ PowerPC®
SDRAM: 8 MB
FLASH Memory: 2 MB
Firmware stored in FLASH may be upgraded
via LAN interface
Power Supply
+5V, 2A (10 W) max DC, with auto-sensing
AC adapter provided for 100VAC–240VAC,
50Hz–60Hz operation
Typical power consumption: +5V, 0.8A(4W)
+5V, 2A (10 W) max DC, with auto-sensing
AC adapter provided for 100VAC–240VAC,
50Hz–60Hz operation
Typical power consumption: +5V, 0.8A(4W)
Environment
Operating: 0° C to 70° C
Storage: –40° C to 70° C
Relative Humidity: 10% to 90% non-condensing
Operating: 0° C to 70° C
Storage: –40° C to 70° C
Relative Humidity: 10% to 90% non-condensing
Dimensions
SSE/DSE
Height: 1.18” (2.99 cm)
Width: 3.33” (8.46 cm)
Depth: 4.69” (11.91 cm)
SSE/DSE
Height: 1.18” (2.99 cm)
Width: 3.33” (8.46 cm)
Depth: 4.69” (11.91 cm)
SSE-100D-EMB
Height: .61” (1.54 cm)
Width: 3.50” (8.89 cm)
Depth: 4.50” (11.43 cm)
Height: .61” (1.54 cm)
Width: 3.50” (8.89 cm)
Depth: 4.50” (11.43 cm)
QSE
Height: 1.50” (3.40 cm)
Width: 9.96” (25.30 cm)
Depth: 4.69” (11.91 cm)
Height: 1.50” (3.40 cm)
Width: 9.96” (25.30 cm)
Depth: 4.69” (11.91 cm)
ESE
Height: 1.96” (4.97 cm)
Width: 9.96” (25.30 cm)
Depth: 5.40” (13.72 cm)
Height: 1.96” (4.97 cm)
Width: 9.96” (25.30 cm)
Depth: 5.40” (13.72 cm)
Certifications
FCC, CE
FCC, CE
Accessories
Surge Suppression
DB-9 to RJ-45 Adapters
DB-9 to Screw Terminal Adapters
International Power Cords
DIN Rail Mounting Kit
Surge Suppression
DB-9 to RJ-45 Adapters
DB-9 to Screw Terminal Adapters
International Power Cords
DIN Rail Mounting Kit
Freescale and the Freescale Enabled logo are
trademarks of Freescale Semiconductor Inc.
PowerPC is a registered trademark of IBM Corporation
and is used under license.
Microsoft, Windows and the Windows logo are
registered trademarks of Microsoft Corporation.
Prism is a trademark of Conexant Systems, Inc.
Intellisock is a trademark of Quatech, Inc.
trademarks of Freescale Semiconductor Inc.
PowerPC is a registered trademark of IBM Corporation
and is used under license.
Microsoft, Windows and the Windows logo are
registered trademarks of Microsoft Corporation.
Prism is a trademark of Conexant Systems, Inc.
Intellisock is a trademark of Quatech, Inc.
Model
Ports
Connector
SSE-100D
1
DB-9 Male
SSE-100D-EMB
1
DB-9 Male
SSE-100D-5V
1
DB-9 Male
SSE-400D
1
DB-9 Male
DSE-100D
2
DB-9 Male
DSE-100D-5V
2
DB-9 Male
DSE-100D-EMB
2
DB-9 Male
DSE-400D
2
DB-9 Male
QSE-100D
4
DB-9 Male
QSE-100M
4
RJ-45 Female
QSE-400D
4
DB-9 Male
QSE-400M
4
RJ-45 Female
ESE-100D
8
DB-9 Male
ESE-100M
8
RJ-45 Female
ESE-400D
8
DB-9 Male
ESE-400M
8
RJ-45 Female
RS-232
DB-9
Pin #
RS-422/485
4 wire mode
DCD
1
Auxln-
RxD
2
RxD+
TxD
3
TxD+
DTR
4
AuxOut-
GND
5
GND
DSR
6
RxD-
RTS
7
AuxOut+
CTS
8
Auxln+
RI
9
TxD-