Примечания к выпуску для Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP)
36
Release Notes for Cisco ONS 15454 SDH Release 4.6.2
OL-4855-01
New Features and Functionality
DDTS # CSCec04550
In a SNCP configuration, upon detecting a double-path failure with UNEQ-P, the UNEQ-P on the protect
path is not reported. This issue is resolved in Release 4.6.
path is not reported. This issue is resolved in Release 4.6.
Performance Monitoring
DDTS # CSCec63978
The clear button on the PM pane in CTC does not clear PJ detected seconds, PJ generated seconds, or
PJ diff. Clearing PMs should result in the associated cell being marked yellow (INVALID) and zero;
however, for PJ detected seconds, PJ generated seconds, and PJ diff, the cells remain unchanged.
PJ diff. Clearing PMs should result in the associated cell being marked yellow (INVALID) and zero;
however, for PJ detected seconds, PJ generated seconds, and PJ diff, the cells remain unchanged.
There is no workaround for PJ seconds. These will continue to accumulate where they left off and not
be marked invalid. PJ diff should be marked invalid, but is recalculated to the correct value, and is
displayed as such. This issue is resolved in Release 4.6.2.
be marked invalid. PJ diff should be marked invalid, but is recalculated to the correct value, and is
displayed as such. This issue is resolved in Release 4.6.2.
DDTS # CSCea38791
In the CTC Performance > Statistics tab of the G1000-4 or G1000-2, there are no entries for Rx/Tx
Multicast and Broadcast packets. This issue is resolved in Release 4.6.
Multicast and Broadcast packets. This issue is resolved in Release 4.6.
New Features and Functionality
This section highlights new features and functionality for Release 4.6.x. For detailed documentation of
each of these features, consult the user documentation.
each of these features, consult the user documentation.
New Hardware
FC_MR-4 Card
The FC_MR-4 (Fibre Channel 4-port) card uses pluggable Gigabit Interface Converters (GBICs) to
transport non-SONET/SDH-framed, block-coded protocols over SONET/SDH in virtually concatenated
or contiguously concatenated payloads. The FC_MR-4 can transport Fibre Channel over SONET/SDH
using Fibre-Channel client interfaces and allows transport of one of the following at a time:
transport non-SONET/SDH-framed, block-coded protocols over SONET/SDH in virtually concatenated
or contiguously concatenated payloads. The FC_MR-4 can transport Fibre Channel over SONET/SDH
using Fibre-Channel client interfaces and allows transport of one of the following at a time:
•
Two contiguously concatenated (CCAT) STS-24c/VC4-8c circuits
•
One STS-48c/VC4-16c CCAT
•
Two virtually concatenated (VCAT) circuits (STC3c-8V/VC4-8v) compliant with ITU-T G.7041
GFP-T and Telcordia GR-253-CORE
GFP-T and Telcordia GR-253-CORE
•
One STS-24c/VC4-8c CCAT and one STS-24c/VC4-8c VCAT
In Software Release 4.6.x, only two of the four ports can be active at one time.
For further specifications of this card, consult the Cisco ONS 15454 SDH Reference Guide, Release 4.6.