Руководство Пользователя для Cisco Cisco Content Security Management Appliance M160
14-27
AsyncOS 8.1 for Cisco Content Security Management User Guide
Chapter 14 Common Administrative Tasks
Step 7
If you are installing:
a.
Be prepared to respond to prompts during the process.
The process pauses until you respond.
A progress bar appears near the top of the page.
b.
At the prompt, click Reboot Now.
Note
Do not interrupt power to the appliance for any reason (even to troubleshoot an upgrade
issue) until at least 20 minutes have passed since you rebooted.
issue) until at least 20 minutes have passed since you rebooted.
c.
After about 10 minutes, access the appliance again and log in.
What To Do Next
•
If the process was interrupted, you must start the process again.
•
If you downloaded but did not install the upgrade:
When you are ready to install the upgrade, follow these instructions from the beginning, including
the prerequisites in the Before You Begin section, but choose the Install option.
the prerequisites in the Before You Begin section, but choose the Install option.
•
If you installed the upgrade, see
•
Before viewing the online help after upgrade, clear your browser cache, exit the browser, then open
it again. This clears the browser cache of any outdated content.
it again. This clears the browser cache of any outdated content.
Viewing Status of, Canceling, or Deleting a Background Download
Procedure
Step 1
Choose Management Appliance > System Administration > System Upgrade.
Step 2
Click Upgrade Options.
Step 3
Choose an option:
To
Do This
View download status
Look in the middle of the page.
If there is no download in progress and no completed download
waiting to be installed, you will not see download status information.
waiting to be installed, you will not see download status information.
Upgrade status also appears in upgrade_logs.
Cancel a download
Click the Cancel Download button in the middle of the page.
This option appears only while a download is in progress.
Delete a downloaded installer
Click the Delete File button in the middle of the page.
This option appears only if an installer has been downloaded.