Технические ссылки для Cisco Cisco NSS322 2-Bay Smart Storage
How to Use RADIUS on Cisco Smart Storage
© 2010 Cisco Systems, Inc. All rights reserved.
Page 5 of 14
R outer S ettings
To configure your router settings, follow these steps. The RVS4000 router is used in this example.
2. Log in to the administrator privilege account to access to GUI.
3. Choose L2 Switch > RADIUS from the Navigation menu.
4. Enable RADIUS Mode by selecting Enabled from the drop down list.
5. Enter the RADIUS IP address (Smart Storage server IP address).
6. By default, the RADIUS UDP Port is 1813. If you are using a different port
number, ensure that the port matches between the router and the RADIUS
server.
7. Enter the RADIUS Secret. This is the secret key defined at the Smart Storage
RADIUS server menu. For this application note, enter “rvsradius” in the router
configuration.
8. Click Save.
By default, all ports are set to Force Authorized which means access is allowed. To access a
network port with RADIUS authorization, the Administration State needs to be changed to Auto.
The authentication is checked and verified with the RADIUS setup for authorization to access the
network.