Руководство По Установке для Cisco Cisco Packet Data Gateway (PDG)

Cabling the Gigabit Ethernet Line Cards

Cabling the Optical SFP Interface ▀

ASR 5000 Installation Guide ▄

133

Cabling the Optical SFP Interface

To interconnect the optical SFP interface(s) on the GLC2 and the QGLC, follow the instructions below.

Step 1

To ensure full connectivity, use your thumb to firmly press the SFP transceiver module into its socket on the front panel
of the card.

Step 2

Remove the cover from the SFP interface.

Step 3

Inspect and clean the connector’s fiber-optic end-faces.

Step 4

Insert the optical cable from a network device into the interface and ensure that it is securely in place.

Step 5

Repeat step 1 through step 5 to connect a fiber-optic cable to other ports, if so equipped.