Руководство По Устранению Ошибки для Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP)

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Resolve Common Connectivity Problems
      Establish Link Level Connectivity from a PC Directly Attached to the Active TCC
      Establish IP Connectivity From a PC Directly Attached to the Active TCC
      Install and Configure the Java Software
      Download and Launch the CTC Application
      Common Problems When You Install and Configure the JRE Software
 Related Information

This document addresses common problems that you encounter when you try to:

Establish link level connectivity from a PC that is directly attached to the active TCC.

• 

Establish IP connectivity from a PC that is directly attached to the active TCC.

• 

Install and configure the Java

TM

 software on the PC.

• 

Use the TCC to download and launch the CTC software.

• 

Note: This document is not an installation guide. For detailed installation and setup information, refer to the
Using the Cisco Transport Controller chapter of the Cisco ONS 15454 user documentation. Use this document
in conjunction with the user documentation as a troubleshooting and reference guide, or as a standalone
troubleshooting guide.

There are no specific requirements for this document.

The information in this document is based on the Cisco ONS 15454.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.