Техническая Инструкция для Cisco Cisco Nexus 5010 Switch

Contributed by Padmanabhan, Cisco TAC Engineer.
Mar 25, 2014

Introduction
Prerequisites
     Requirements
     Components Used
Overview
Step 1: Configure New Setup
     Required Features Configuration
     Basic vPC Configuration
     VSAN Configuration
Step 2: Configure UCS Server and VIC Adapter
Step 3: Configure Nexus 5K Switches for Different Topologies
     Topology 1: CNA Ports Directly Connected to Nexus 5K Switch
        Overview
        Sample Configuration on A Side of Nexus 5K Switch
        Verification
     Topology 2: FEX Connected to Nexus 5K Switch in Straight−Through Mode and CNA Connected to FEX
Ports
        Overview
        Sample Configuration
        Host vPC Configuration
        Verification
     Topology 3: FEX Connected to Nexus 5K Switch in Enhanced vPC Mode and CNA Connected to FEX
Ports
        Overview
        Active − Active FEX Configuration
        FCoE Keyword on FEX 102 on B Side of Nexus 5K Switch
        Host vPC Configuration
        VFC Configuration
        Verification
Verify
Troubleshoot
Related Information

This document describes how to configure Fibre Channel over Ethernet (FCoE) connectivity between Virtual
Interface Card (VIC) adapters installed on Cisco Unified Computing System (UCS) rack servers and Cisco
Nexus 5500 (Nexus 5K) Series Switches. Two sample topologies include Cisco Fabric Extender (FEX)
devices, and one sample topology does not.