для Cisco Cisco Packet Data Gateway (PDG)

 

 

 

MMEMgr 

The instance number MME Manager for which the information are displayed here. 

Peerid 

The identifier of peer MME of which statistic are displayed. 

Global ENodeB 
ID 

The global eNodeB identifier which is associated with this peer node. 

Assoc Uptime 

The uptime of the association between the MME and the eNodeB.  
The format is 0000d00h00m (where d= day, h=hour, m=minutes) when h > =24 hrs, otherwise it will be 
displayed as 00h00m00s. 

eNodeB Name 

The eNodeB name as reported by the eNodeB. 

eNodeB Type 

The NodeB type, either Home or Macro, as reported by the eNodeB. 
(HeNB-GW) is listed if this is a Home eNodeB Gateway. 

MME Service 
Name 

The name of the MME service running on peer node. 

MME Service 
Address 

The IP address which is used by MME service to connect with eNodeB. 

MME Service 
Port 

The port number which is used by MME service to connect with eNodeB. 

eNodeB Port 

The port number of eNodeB which is used by eNodeb to associate with MME service. 

eNodeB IP 
Address(s) 

The IP address of eNodeB which is used by eNodeb to associate with MME service. 

Crypto-map 
Name 

The name of the crypto map supporting this EnodeB association. 

Paging DRX 

The paging discontinuous reception set for paging procedure between eNodeB and MME. 

Supported TAI(s)  The id of supported Tracking Area Identifier of which this eNodeB and MME belongs too. The Tracking 

Area Identity is constructed from the MCC (Mobile Country Code), MNC (Mobile Network Code) and TAC 
(Tracking Area Code). 

CSG ID(s) 

The closed subscriber groups Ids supported per eNodeB association with an MME service. 
A Closed Subscriber Group is a collection of cells within an eUTRAN and UTRAN that are open to only a 
certain group of subscribers. 
Within a PLMN, a Closed Subscriber Group is identified by a Closed Subscriber Group Identity (CSG-ID). 
The CSG ID shall be fix length 27 bit value. 

S1 Paging Rate 
Limit  

The S1 paging rate limit for the eNodeB as configured using the 

 command. 

Path Source IP 
Address 

 The local MME address to establish the path towards VLR. In case of multiple addresses, the addresses will 
be shown as separated by space character.