Техническая Инструкция для Cisco Cisco MeetingPlace IP Gateway
In the AAR table, define the Dial String. In this document, it is 321, which is what you entered in the UDP
table either as part of the UDP Code (release 9.5 and later) or as part of the Insert Digits in release 11.x or
release 1.x with a Minimum and Maximum Total of 7 digits using Route Pattern (in a partition table) defined
by either p221 or 221 with a Call Type of AAR.
table either as part of the UDP Code (release 9.5 and later) or as part of the Insert Digits in release 11.x or
release 1.x with a Minimum and Maximum Total of 7 digits using Route Pattern (in a partition table) defined
by either p221 or 221 with a Call Type of AAR.
The route pattern in the above form can be defined as part of a Partition−Route−Table or a plain old
Route−Pattern. For those that use Partition−Route−Table, the form below helps you configure it with a Route
Index of 221 and a PGN 1 set to Route−Pattern 221.
Route−Pattern. For those that use Partition−Route−Table, the form below helps you configure it with a Route
Index of 221 and a PGN 1 set to Route−Pattern 221.
For those that do not want to use Partition−Route−Table, ensure that your AAR analysis form above does not
have a p221 in the Route Pattern field. Instead, make sure it is 221.
have a p221 in the Route Pattern field. Instead, make sure it is 221.
In the Route Pattern form, define the IP Trunk Group connected between the Avaya Communication Manager
and the Cisco MeetingPlace Server (for instance, the M3).
and the Cisco MeetingPlace Server (for instance, the M3).
Note: This is not the MeetingPlace IP Gateway on the Windows 2000 Server.