Техническая Инструкция для Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP)
Use NAT to Hide the Real IP Address of CTC to
Establish a Session with ONS 15454
Establish a Session with ONS 15454
Document ID: 65122
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
Topology
Configure
Network Diagram
Configurations
Cisco ONS 15454 Configuration
PC Configuration
Router Configuration
Verify
Verification Procedure
Troubleshoot
Troubleshooting Commands
Related Information
Prerequisites
Requirements
Components Used
Conventions
Background Information
Topology
Configure
Network Diagram
Configurations
Cisco ONS 15454 Configuration
PC Configuration
Router Configuration
Verify
Verification Procedure
Troubleshoot
Troubleshooting Commands
Related Information
Introduction
This document provides a sample configuration for Network Address Translation (NAT) to establish a session
between Cisco Transport Controller (CTC) and ONS 15454. The configuration hides the real IP address of
CTC through NAT when CTC resides inside the firewall.
between Cisco Transport Controller (CTC) and ONS 15454. The configuration hides the real IP address of
CTC through NAT when CTC resides inside the firewall.
Note: For this procedure to work, you must ensure that the ports are not blocked or filtered.
Prerequisites
Requirements
Before you attempt this configuration, ensure that you have knowledge of these topics:
Cisco ONS 15454
•
Cisco Routers that support NAT
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco ONS 15454 version 5.0 and later
•
Cisco IOS® Software Release 12.1(11) and later
•