Руководство По Устранению Ошибки для Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP)
Provision the DS3, STS1/DS3, and VT1.5 Circuit on
a DS3XM−12 Card
a DS3XM−12 Card
Document ID: 70918
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Topology
DS3XM−12 Card and Connection Overview
Specific Card and Port Information
Configuration and Data Flow
Related Information
Prerequisites
Requirements
Components Used
Conventions
Topology
DS3XM−12 Card and Connection Overview
Specific Card and Port Information
Configuration and Data Flow
Related Information
Introduction
This document describes how to provision the DS3, STS1/DS3, and VT1.5 circuit on a DS3XM−12 card on
the ONS 15454.
the ONS 15454.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco ONS 15454
•
DS3XM−12 card
•
Components Used
The information in this document is based on all versions of Cisco ONS 15454.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Topology
This document uses a lab setup with two ONS 15454s as Figure 1 shows. They are named Node 91 and Node
90.
90.
Figure 1Topology