Руководство По Установке для Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP)
8
Installing and Operating UBIC-V EIAs in the Cisco ONS 15454
78-16140-04
Install the Alignment Standoffs on the ONS 15454 Shelf
Figure 4
Removing a Sheet Metal Cover
Step 5
Loosen and remove the screw that secures the alarm and timing panel cover to the shelf. Store the alarm
and timing panel cover for replacement after you install the UBIC-V EIAs.
and timing panel cover for replacement after you install the UBIC-V EIAs.
Install the Alignment Standoffs on the ONS 15454 Shelf
Before you can install the UBIC-V EIAs, you must determine if alignment standoffs are already
installed. If not, you must install the standoffs.
installed. If not, you must install the standoffs.
You will need the following equipment to install the alignment standoffs:
•
#2 Phillips screwdriver
•
Small flathead screwdriver
•
Alignment standoffs (6) (700-19485-XX)
Step 1
Locate the alignment standoff holes on the shelf assembly where you want to install the UBIC-V EIA(s)
(
(
). If alignment standoffs are not installed, go to
. If alignment standoffs are already
installed, continue with the
.
43881